V-TEC DT607F/ID/FE/S1 Flush-Mount 2-Wire RFID Video Door Station

The V-TEC DT607F/ID/FE/S1 is a stylish, flush-mounted outdoor video door station designed for compatible V-TEC / 2EASY DT Series 2-wire video intercom systems.

Combining a 2MP wide-angle fisheye camera, integrated RFID proximity access control, two-way audio communication and a single visitor call button, this door station provides a convenient and secure entrance solution for private homes, apartments and residential properties.

Its recessed stainless steel front panel offers a neat and professional appearance, making it suitable for entrances where an attractive, integrated finish is required.

Key Features & Benefits

  • 2MP Fisheye Camera: High-quality colour CMOS camera for visitor identification.
  • 170° Wide-Angle Viewing: Provides a broad view of the entrance area.
  • Single Call Button: Suitable for a single residence or individual apartment.
  • Built-In RFID Reader: Allows authorised users to unlock the entrance using compatible, registered proximity cards or fobs.
  • Flush-Mount Installation: Recessed design for a clean, professional finish.
  • 2-Wire BUS Technology: Works with compatible V-TEC DT Series indoor monitors and power supplies.
  • Two-Way Audio: Communicate with visitors through a connected compatible indoor monitor.
  • Night-Time Illumination: Supports visitor identification in low-light conditions.
  • Electric Door Release: Supports connection to a compatible electric door lock.
  • Second Door Control: A separate V-TEC DT-RLC relay module can be added to control a second electric door lock or gate.
  • Weather-Resistant Design: IP54 protection rating for appropriate outdoor installations.
  • Durable Construction: Stainless steel flush-mounted front panel.

2MP Camera with 170° Fisheye Lens

The DT607F/ID/FE/S1 features a 2-megapixel colour CMOS camera with a 170° wide-angle fisheye lens.

This wide field of view helps residents identify visitors standing directly in front of the entrance as well as those positioned slightly to the side.

When connected to a compatible DT Series indoor video monitor, the camera image can be displayed during visitor calls and supported monitoring functions.

Built-In RFID Proximity Access Control

The integrated RFID reader offers a convenient way for authorised users to unlock the entrance without using a traditional key.

Compatible RFID cards or key fobs can be registered to the door station, allowing residents to activate a connected electric lock by presenting an authorised credential.

The system supports up to 500 registered proximity cards, subject to the installed device version and programming configuration.

Please Note: Additional RFID cards and key fobs may need to be purchased separately. The number supplied depends on the manufacturer's packaging.

Electric Door Lock Control

The DT607F/ID/FE/S1 supports the operation of a compatible electric door lock.

Residents can release the entrance from a compatible indoor monitor, while authorised users can also activate the lock using a registered RFID credential.

The built-in lock output supports suitable locking equipment, subject to the manufacturer's electrical limits and the selected wiring method.

Locks requiring additional power must be connected using an appropriate external power supply and the correct relay wiring arrangement.

Important: Opening a Second Door or Gate Requires a DT-RLC Module

If you wish to control a second electric door lock or gate from the same intercom system, an additional V-TEC DT-RLC relay module is required.

The DT607F/ID/FE/S1 provides control for a primary entrance, while the optional DT-RLC Lock Control Interface enables a separately controlled second locking point when correctly configured.

This is particularly useful for properties with:

  • A pedestrian entrance door and a separate entrance gate
  • Two independently controlled electric locks
  • A main entrance and a secondary access door
  • A gate motor requiring a suitable relay activation signal

The DT-RLC module is not included with this outdoor door station and must be purchased separately.

Additional wiring, a compatible electric lock or gate interface, and a separate lock power supply may also be required depending on the installation.

Important: The DT-RLC is intended to operate a compatible second locking circuit. Compatibility with the chosen gate controller or electric lock must be confirmed before installation.

Flush-Mount Design & Dimensions

The DT607F/ID/FE/S1 is designed for recessed or flush-mounted installation, allowing the front panel to sit neatly against the entrance wall.

Product Dimensions:

  • Height: 220mm
  • Width: 119mm
  • Depth: 52mm
  • Overall Dimensions: 220 (H) × 119 (W) × 52 (D) mm

Before installation, check that there is sufficient wall depth and space for the appropriate mounting box.

The installation opening and recess dimensions should be taken from the manufacturer's mounting diagram rather than assumed to be identical to the product's overall dimensions.

Technical Specifications

  • Brand: V-TEC / 2EASY
  • Model: DT607F/ID/FE/S1
  • Product Type: Outdoor Video Door Station
  • System: DT Series Digital 2-Wire BUS
  • Installation Type: Flush-Mounted / Recessed
  • Call Buttons: 1
  • Camera: 2MP Colour CMOS
  • Image Sensor: 1/2.7-inch CMOS
  • Lens: 170° Fisheye
  • Audio: Built-In Microphone and Speaker
  • Night Viewing: Automatic Illumination
  • RFID Access Control: Built-In Proximity Card Reader
  • RFID Card Capacity: Up to 500 Cards
  • Wiring: 2-Wire, Non-Polarised BUS
  • Power Supply: 24V DC via Compatible DT Series System Supply
  • Standby Power Consumption: Approximately 0.8W
  • Operating Power Consumption: Approximately 3W
  • Internal Lock Supply: 12V DC, Maximum 280mA
  • Lock Release Time: Adjustable from 1 to 99 Seconds
  • Second Lock Control: Requires Optional DT-RLC Module
  • Outdoor Protection: IP54
  • Front Panel Material: Stainless Steel
  • Operating Temperature: -20°C to +55°C
  • Dimensions: 220 × 119 × 52mm (H × W × D)

Compatible V-TEC DT Series Equipment

The DT607F/ID/FE/S1 is designed for use with compatible V-TEC DT Series components, including:

  • Compatible DT Series indoor video monitors
  • Compatible DT Series system power supplies
  • Suitable DT Series distribution modules
  • Compatible electric door locks and interfaces
  • Optional DT-RLC relay module for second lock control

Please Note: This is a DT Series 2-wire BUS device. It is not a standard Ethernet PoE door station and is not automatically compatible with V-TEC DH Series intercom equipment.

What's Included?

  • 1 × V-TEC DT607F/ID/FE/S1 Outdoor Video Door Station
  • Manufacturer-Supplied Installation and Mounting Accessories, According to Packaging
  • Product Documentation, Where Supplied

Not Included Unless Specifically Stated: Indoor monitor, DT Series power supply, wiring, electric lock, additional lock power supply, RFID accessories and optional DT-RLC second-door relay module.

Ideal Applications

  • Private homes and villas
  • Individual apartments
  • Residential entrance doors
  • Pedestrian entrance gates
  • Properties requiring RFID proximity access
  • Compatible DT Series intercom upgrades and replacements

Important Installation Information

The DT607F/ID/FE/S1 must be installed using compatible V-TEC DT Series power and communication equipment.

Correct system addressing, wiring, electric lock configuration and appropriate weather protection are essential for reliable operation.

For second-door or gate control, the V-TEC DT-RLC module must be purchased and installed separately.

All electrical work must comply with applicable regulations and the manufacturer's installation instructions.

Why Choose the V-TEC DT607F/ID/FE/S1?

The V-TEC DT607F/ID/FE/S1 combines a 2MP wide-angle fisheye camera, integrated RFID proximity access control, simple single-button calling and a durable flush-mounted design.

With support for a compatible primary electric lock and optional DT-RLC second-door control, it offers a practical and flexible entrance solution for homes and residential properties using the V-TEC DT Series 2-wire intercom system.